This is a heavy-duty pedestal designed to support a 44kg condenser dryer, raising it to a comfortable height for loading and unloading. The design prioritizes strength and stability to handle the static weight and significant dynamic forces from the dryer's operation. While using simple butt joints as requested, the plan incorporates lower stretchers to create a rigid, fully-braced structure that prevents racking and joint loosening over time — a critical safety feature for this application. Note: To meet the final 400mm height including the plywood top, the legs are slightly shorter than 400mm, which is the most practical interpretation of the provided dimensions.
beginner wood other
Dimensions: {"unit":"mm","depth":645,"width":650,"height":400,"autoEstimate":false}
Materials
- 90mm x 45mm H1.2 NZ Treated Pine (or equivalent 2x4 stock)
- 12mm Structural Plywood
- Heavy-Duty Construction Adhesive
- Rubber Non-Slip Mat
Tools Required
- Drill/Driver
- Drill Bit Set (including a bit for screw pilot holes)
- Countersink Bit
- Tape Measure
- Carpenter's Square or Combination Square
- Pencil
- Caulking Gun (for adhesive)
- Safety Glasses
- Clamps (at least 2, corner clamps are helpful)