A high-rigidity 96" x 48" x 36" mobile shop workstation featuring three independent 180-degree rotating flip-top tool stations (Miter Saw, Planer, Table Saw). Direct load transfer is handled by six 4x4 vertical posts anchored to 5-inch total-lock casters, linked with doubled 2x6 longitudinal rails and fully gusseted rear shear panels. Each tool rotates on a 1-inch solid steel pivot rod supported by dual cast-iron pillow-block bearings mounted on hardwood doubler blocks, locked securely into operation with 4-inch heavy-duty barrel latches.
advanced wood other
Dimensions: {"unit":"in","depth":48,"width":96,"height":36,"autoEstimate":false}
Materials
- 4x4 Structural Posts (Douglas Fir)
- 2x6 Structural Framing Rails (Douglas Fir)
- 2x4 Sub-Top Support Grid (Douglas Fir)
- 3/4" Baltic Birch Plywood (4' x 8' Sheets)
- 8/4 Hard Maple (Bearing Blocks)
- 1" Solid Steel Round Rod (Plain Smooth)
Tools Required
- Table saw with thin-kerf blade
- Miter saw
- Router with 1/2" straight bit and flush-trim bit
- Drill press with 1" Forstner bit & twist drill bits
- Hand drill & impact driver
- Socket set & open-end wrenches (1/2", 9/16", 3/4")
- Clamps (Minimum 6 x 36" parallel bar clamps)
- Hacksaw or Angle grinder with metal cut-off wheel
- 5-cut table saw alignment square / digital angle gauge