A clever, low-cost utility project converting a scrap 13-inch steel trailer rim and 10 feet of 1-inch Schedule 40 PVC pipe into a free-standing hand-crank hose reel. Designed with zero expensive fittings or complex wood joinery, the stand uses two crossed V-frames tightly lashed with heavy-duty zip ties or weather-resistant rope. The center axle bore wobble is eliminated using an engineered PVC split-sleeve and duct-tape bushing system, while a short PVC handle bolted directly through one of the 5 lug holes provides effortless hand-cranking leverage for 50 feet of garden hose.
beginner wood other
Dimensions: {"unit":"in","depth":12,"width":24,"height":36,"autoEstimate":true}
Materials
- 1" Schedule 40 PVC Pipe (10 ft stick)
- 13" Steel Trailer Rim (5-lug pattern, tire removed)
- Heavy-Duty UV Zip Ties (120 lb rating) or 1/4" Braided Polypropylene Rope
- 3/8"-16 x 3.5" Hex Bolt with 2 Fender Washers & 1 Lock Nut
- Heavy-Duty Duct Tape or Rubber Friction Tape (Center Hub Stabilizer)
- 1/4" x 2-1/2" Cotter Pins (Axle Stop Pins)
Tools Required
- Hacksaw or PVC pipe cutter
- Electric drill
- 3/8" and 1/4" twist drill bits
- Adjustable wrench / socket set
- Tape measure & marker
- Utility knife